| 000 | 11094cam a2202509 i 4500 | ||
|---|---|---|---|
| 001 | 160458 | ||
| 008 | 150413s20032003ne a b 001 0 eng | ||
| 020 |
_a9780750651295 _q(paperback) |
||
| 040 |
_aMEF _beng _erda |
||
| 041 | 0 | _aeng | |
| 049 | _aTR-IsMEF | ||
| 050 | 0 | 0 |
_aTS176 _b.S33 2003 |
| 100 | 1 |
_aScallan, Peter, _eauthor. |
|
| 245 | 1 | 0 |
_aProcess planning : _bthe design/manufacture interface / _cPeter Scallan, Head of Studies Saudi British Electronics Institute Riyadh, Saudi arabia ( formerly of the University of Paisley) |
| 264 | 1 |
_aAmsterdam ; _aBoston : _bButterworth-Heinemann, _c2003. |
|
| 264 | 4 | _a©2003 | |
| 300 |
_axii, 483 pages : _billustrations ; _c25 cm. |
||
| 336 |
_atext _2rdacontent |
||
| 337 |
_aunmediated _2rdamedia |
||
| 338 |
_avolume _2rdacarrier |
||
| 504 | _aIncludes bibliographical references and index. | ||
| 505 | 0 | _aIntroduction to Manufacturing -- What is Process Planning? -- Drawing Interpretation -- Material Evaluation and Process Selection -- Production Equipment and Tooling Selection -- Process Parameters -- Workholding Devices -- Selection of Quality Assurance Methods -- Economics of Process Planning -- From Design to Manufacture. | |
| 650 | 0 |
_aManufacturing processes _xPlanning _xData processing. |
|
| 900 | _aMEF Üniversitesi Kütüphane katalog kayıtları RDA standartlarına uygun olarak üretilmektedir / MEF University Library Catalogue Records are Produced Compatible by RDA Rules | ||
| 910 | _aPandora | ||
| 942 |
_2lcc _cBKS |
||
| 970 | 0 | 1 | _tContens |
| 970 | 0 | 1 |
_aPreface, _ix |
| 970 | 0 | 1 |
_aAcknowledgements, _x |
| 970 | 1 | 2 |
_l1 _tIntroduction to manufacturing |
| 970 | 1 | 1 |
_l1.1 _tIntroduction, _p1 |
| 970 | 1 | 1 |
_l1.2 _tAims and objectives, _p2 |
| 970 | 1 | 1 |
_l1.3 _tWhat is manufacturing?, _p2 |
| 970 | 1 | 1 |
_l1.4 _tWhat is a manufacturing system?, _p3 |
| 970 | 1 | 1 |
_l1.5 _tInputs and outputs of a manufacturing system, _p4 |
| 970 | 1 | 1 |
_l1.6 _tCommon characteristics of a manufacturing system, _p5 |
| 970 | 1 | 1 |
_l1.7 _tDeveloping a manufacturing strategy, _p6 |
| 970 | 1 | 1 |
_l1.8 _tManufacturing organizational structures, _p7 |
| 970 | 1 | 1 |
_l1.9 _tCategories of manufacturing system, _p11 |
| 970 | 1 | 1 |
_l1.10 _tProcessing strategies, _p16 |
| 970 | 1 | 1 |
_l1.11 _tPlant layout, _p19 |
| 970 | 1 | 1 |
_l1.12 _tManufacturing engineering, _p25 |
| 970 | 0 | 1 |
_a1.13 Summary, _p26 |
| 970 | 0 | 1 |
_aCase study 1.1: Re-organization at Edward Marks Ltd, _p27 |
| 970 | 0 | 1 |
_aCase study 1.2: Manufacturing at Stickley Furniture, _p30 |
| 970 | 0 | 1 |
_aChapter review questions, _p32 |
| 970 | 0 | 1 |
_aReferences and further reading, _p34 |
| 970 | 1 | 2 |
_l2 _tWhat is process planning? |
| 970 | 1 | 1 |
_l2.1 _tIntroduction, _p35 |
| 970 | 1 | 1 |
_l2.2 _tAims and objectives, _p35 |
| 970 | 1 | 1 |
_l2.3 _tDesign and manufacture cycle, _p35 |
| 970 | 1 | 1 |
_l2.4 _tWhat is process planning?, _p38 |
| 970 | 1 | 1 |
_l2.5 _tProcess planning - the design/manufacture interface, _p38 |
| 970 | 1 | 1 |
_l2.6 _tProcess planning activities, _p41 |
| 970 | 1 | 1 |
_l2.7 _tProcess planning and industrial engineering, _p46 |
| 970 | 1 | 1 |
_l2.8 _tProcess planning and quality assurance, _p50 |
| 970 | 1 | 1 |
_l2.9 _tProcess planning and production planning, _p50 |
| 970 | 1 | 1 |
_l2.10 _tProcess planning methods, _p52 |
| 970 | 1 | 1 |
_l2.11 _tBasic process planning terminology, _p56 |
| 970 | 0 | 1 |
_a2.12 Summary, _p56 |
| 970 | 0 | 1 |
_aCase study 2.1: Manufacturing at McCall Diesel Works, _p57 |
| 970 | 0 | 1 |
_aCase study 2.2: Planning at High Performance Pumps, _p59 |
| 970 | 0 | 1 |
_aChapter review questions, _p60 |
| 970 | 0 | 1 |
_aReferences and further reading, _p61 |
| 970 | 1 | 2 |
_l3 _tDrawing interpretation |
| 970 | 1 | 1 |
_l3.1 _tIntroduction, _p63 |
| 970 | 1 | 1 |
_l3.2 _tAims and objectives, _p63 |
| 970 | 1 | 1 |
_l3.3 _tEngineering communication, _p63 |
| 970 | 1 | 1 |
_l3.4 _tIdentifying useful supplementary information, _p78 |
| 970 | 1 | 1 |
_l3.5 _tMaterial and specification, _p79 |
| 970 | 1 | 1 |
_l3.6 _tSpecial material treatments, _p79 |
| 970 | 1 | 1 |
_l3.7 _tEquivalent parts (interchangeability and standardization), _p79 |
| 970 | 1 | 1 |
_l3.8 _tScrew thread forms, _p81 |
| 970 | 1 | 1 |
_l3.9 _tTool references, _p81 |
| 970 | 1 | 1 |
_l3.10 _tDimensional tolerances, _p82 |
| 970 | 1 | 1 |
_l3.11 _tLimits and fits, _p84 |
| 970 | 1 | 1 |
_l3.12 _tGauge references, _p86 |
| 970 | 1 | 1 |
_l3.13 _tGeometrical tolerances, _p87 |
| 970 | 1 | 1 |
_l3.14 _tSurface finish, _p92 |
| 970 | 1 | 1 |
_l3.15 _tIdentifying the critical processing factors, _p95 |
| 970 | 0 | 1 |
_a3.16 Summary, _p97 |
| 970 | 0 | 1 |
_aCase study 3.1: Standardization at JH Engineering, _p97 |
| 970 | 0 | 1 |
_aCase study 3.2: Analysis and interpretation of adapter ring, _p100 |
| 970 | 0 | 1 |
_aChapter review questions, _p101 |
| 970 | 0 | 1 |
_aChapter review problems, _p102 |
| 970 | 0 | 1 |
_aReferences and further reading, _p107 |
| 970 | 0 | 1 |
_aRelevant standards, _p107 |
| 970 | 1 | 2 |
_l4 _tMaterial evaluation and process selection |
| 970 | 1 | 1 |
_l4.1 _tIntroduction, _p109 |
| 970 | 1 | 1 |
_l4.2 _tAims and objectives, _109 |
| 970 | 1 | 1 |
_l4.3 _tBasic classification of materials for manufacture, _p110 |
| 970 | 1 | 1 |
_l4.4 _tBasic material properties, _p110 |
| 970 | 1 | 1 |
_l4.5 _tMetals, _p114 |
| 970 | 1 | 1 |
_l4.6 _tCeramics, _p118 |
| 970 | 1 | 1 |
_l4.7 _tPolymers, _p118 |
| 970 | 1 | 1 |
_l4.8 _tComposites and semiconductors, _p119 |
| 970 | 1 | 1 |
_l4.9 _tMaterial selection process and methods, _p120 |
| 970 | 1 | 1 |
_l4.10 _tMaterial evaluation method, _p121 |
| 970 | 1 | 1 |
_l4.11 _tManufacturing processes, _p128 |
| 970 | 1 | 1 |
_l4.12 _tProcess selection, _p146 |
| 970 | 1 | 1 |
_l4.13 _tProcess and operations sequencing, _p152 |
| 970 | 0 | 1 |
_a4.14 Summary, _p159 |
| 970 | 0 | 1 |
_aCase study 4.1: Material evaluation for a car alternatör, _p159 |
| 970 | 0 | 1 |
_aCase study 4.2: Material and process selection for car bumpers, _p163 |
| 970 | 0 | 1 |
_aChapter review questions, _p166 |
| 970 | 0 | 1 |
_aChapter review problems, _p168 |
| 970 | 0 | 1 |
_aReferences and further reading, _p168 |
| 970 | 0 | 1 |
_aRelevant standards, _p169 |
| 970 | 1 | 2 |
_l5 _tProduction equipment and tooling selection |
| 970 | 1 | 1 |
_l5.1 _tIntroduction, _p171 |
| 970 | 1 | 1 |
_l5.2 _tAims and objectives, _p171 |
| 970 | 1 | 1 |
_l5.3 _tProduction equipment for specific processes, _p172 |
| 970 | 1 | 1 |
_l5.4 _tFactors in equipment selection, _p188 |
| 970 | 1 | 1 |
_l5.5 _tMachine selection method, _p191 |
| 970 | 1 | 1 |
_l5.6 _tTooling for specific production equipment, _p192 |
| 970 | 1 | 1 |
_l5.7 _tFactors in tooling selection, _p201 |
| 970 | 1 | 1 |
_l5.8 _tTooling selection method, _p205 |
| 970 | 0 | 1 |
_a5.9 Summary, _p207 |
| 970 | 0 | 1 |
_aChapter review questions, _p208 |
| 970 | 0 | 1 |
_aChapter review problems, _p209 |
| 970 | 0 | 1 |
_aReferences and further reading, _p216 |
| 970 | 0 | 1 |
_aRelevant standards, _p2016 |
| 970 | 1 | 2 |
_l6 _tProcess parameters |
| 970 | 1 | 1 |
_l6.1 _tIntroduction, _p219 |
| 970 | 1 | 1 |
_l6.2 _tAims and objectives, _p219 |
| 970 | 1 | 1 |
_l6.3 _tFactors affecting speeds, feeds and depth of cut, _p219 |
| 970 | 1 | 1 |
_l6.4 _tSurface cutting speeds, _p220 |
| 970 | 1 | 1 |
_l6.5 _tSpindle speeds and number of strokes, _p224 |
| 970 | 1 | 1 |
_l6.6 _tFeed rates, _p227 |
| 970 | 1 | 1 |
_l6.7 _tSpeeds and feeds for NC machines, _p231 |
| 970 | 1 | 1 |
_l6.8 _tDepth of cut, _p231 |
| 970 | 1 | 1 |
_l6.9 _tMachining times, _p234 |
| 970 | 0 | 1 |
_a6.10 Summary, _p242 |
| 970 | 0 | 1 |
_aChapter review questions, _p244 |
| 970 | 0 | 1 |
_aChapter review problems, _p245 |
| 970 | 0 | 1 |
_aReferences and further reading, _p249 |
| 970 | 0 | 1 |
_aRelevant standards, _p250 |
| 970 | 1 | 2 |
_l7 _tWorkholding devices |
| 970 | 1 | 1 |
_l7.1 _tIntroduction, _p251 |
| 970 | 1 | 1 |
_l7.2 _tAims and objectives, _p251 |
| 970 | 1 | 1 |
_l7.3 _tGeneral-purpose workholding devices, _p252 |
| 970 | 1 | 1 |
_l7.4 _tWhat are jigs and fixtures?, _p256 |
| 970 | 1 | 1 |
_l7.5 _tGeneral factors in workholder desing and selection, _p257 |
| 970 | 1 | 1 |
_l7.6 _tBasic principles of jig and fixture desing, _p259 |
| 970 | 1 | 1 |
_l7.7 _tDesing methodology for jig and fixture desing, _p262 |
| 970 | 1 | 1 |
_l7.8 _tTypes of jig and fixture, _p267 |
| 970 | 1 | 1 |
_l7.9 _tPrinciples and practice of location, _p274 |
| 970 | 1 | 1 |
_l7.10 _tPrinciples and practice of clamping, _p281 |
| 970 | 1 | 1 |
_l7.11 _tStandard parts for jigs and fixtures, _p286 |
| 970 | 1 | 1 |
_l7.12 _tWorkholding for NC machines, _p295 |
| 970 | 1 | 1 |
_l7.13 _tFurther workholding devices, _p299 |
| 970 | 0 | 1 |
_a7.14 Summary, _p302 |
| 970 | 0 | 1 |
_aCase study 7.1: Designing a jig for a simple pin, _p303 |
| 970 | 0 | 1 |
_aCase study 7.2: Designing a plate-type jig, _p306 |
| 970 | 0 | 1 |
_aCase study 7.3: Designing a sandwich jig, _p310 |
| 970 | 0 | 1 |
_aChapter review questions, _p315 |
| 970 | 0 | 1 |
_aChapter review problems, _p316 |
| 970 | 0 | 1 |
_aReferences and further reading, _p322 |
| 970 | 0 | 1 |
_aRelevant standards, _p322 |
| 970 | 1 | 2 |
_l8 _tSelection of qualitiy assurance methods |
| 970 | 1 | 1 |
_l8.1 _tIntroduction, _p324 |
| 970 | 1 | 1 |
_l8.2 _tAims and objectives, _p325 |
| 970 | 1 | 1 |
_l8.3 _tWhat is quality assurance? _p325 |
| 970 | 1 | 1 |
_l8.4 _tStatistical quality control, _p332 |
| 970 | 1 | 1 |
_l8.5 _tProcess control, _p339 |
| 970 | 1 | 1 |
_l8.6 _tStatistical process control, _p341 |
| 970 | 1 | 1 |
_l8.7 _tProcess capability, _p355 |
| 970 | 1 | 1 |
_l8.8 _tInspection and measurement, _p359 |
| 970 | 0 | 1 |
_a8.9 Summary, _p371 |
| 970 | 0 | 1 |
_aChapter review questions, _p372 |
| 970 | 0 | 1 |
_aChapter review problems, _p374 |
| 970 | 0 | 1 |
_aReferences and further reading, _p379 |
| 970 | 0 | 1 |
_aRelevant standards, _p380 |
| 970 | 1 | 2 |
_l9 _tEconomics of process planning |
| 970 | 1 | 1 |
_l9.1 _tIntroduction, _p381 |
| 970 | 1 | 1 |
_l9.2 _tAims and objectives, _p381 |
| 970 | 1 | 1 |
_l9.3 _tManufacturing costs, _p381 |
| 970 | 1 | 1 |
_l9.4 _tCost categories, _p383 |
| 970 | 1 | 1 |
_l9.5 _tJob/batch costing, _p386 |
| 970 | 1 | 1 |
_l9.6 _tMarginal costing, _p392 |
| 970 | 1 | 1 |
_l9.7 _tManufacturing materials and costs, _p395 |
| 970 | 1 | 1 |
_l9.8 _tManufacturing processes and costs, _p397 |
| 970 | 1 | 1 |
_l9.9 _tThe 'make or buy?' decision, _p404 |
| 970 | 0 | 1 |
_a9.10 Summary, _p408 |
| 970 | 0 | 1 |
_aChapter review questions, _p408 |
| 970 | 0 | 1 |
_aChapter review problems, _p410 |
| 970 | 0 | 1 |
_aReferences and further reading, _p418 |
| 970 | 1 | 2 |
_l10 _tFrom desing to manufacture |
| 970 | 1 | 1 |
_l10.1 _tIntroduction, _p419 |
| 970 | 1 | 1 |
_l10.2 _tAims and objectives, _p419 |
| 970 | 1 | 1 |
_l10.3 _tOrganization, _p419 |
| 970 | 1 | 1 |
_l10.4 _tComponent, _p424 |
| 970 | 1 | 1 |
_l10.5 _tDrawing interpretation and material evaluation, _p427 |
| 970 | 1 | 1 |
_l10.6 _tProcess selection and sequencing, _p428 |
| 970 | 1 | 1 |
_l10.7 _tMachine selection and operations sequencing, _p431 |
| 970 | 1 | 1 |
_l10.8 _tTooling selection, _p435 |
| 970 | 1 | 1 |
_l10.9 _tSetting the process parameters, _p437 |
| 970 | 1 | 1 |
_l10.10 _tDetermining workholding requirements, _p444 |
| 970 | 1 | 1 |
_l10.11 _tSelection of quality assurance methods, _p447 |
| 970 | 1 | 1 |
_l10.12 _tDocumenting the process plan, _p449 |
| 970 | 1 | 1 |
_l10.13 _tCosting the plan, _p452 |
| 970 | 0 | 1 |
_a10.14 Summary, _p454 |
| 970 | 0 | 1 |
_aChapter review questions, _p456 |
| 970 | 0 | 1 |
_aChapter review problems, _p457 |
| 970 | 0 | 1 |
_aReferences and further reading, _p461 |
| 970 | 0 | 1 | _aAppendices |
| 970 | 0 | 1 |
_aAppendix A: Control chart factors for variables, _p462 |
| 970 | 0 | 1 |
_aAppendix B: Blank control charts, _p463 |
| 970 | 0 | 1 |
_aAppendix C: Blank process planning documents, _p467 |
| 970 | 0 | 1 |
_aIndex, _p469 |
| 999 |
_c4718 _d4718 |
||
| 003 | KOHA | ||